• Your Source for Quality, Service, and Efficient Buying

T-Bar Hangers

T-Bar Hangers are made to fit most standard recessed lighting fixtures. Convenient and very easy to use.

CAT#DESCRIPTIONSTND PACKWEIGHT STND PACK (LBS)
1-75TO USE WITHOUT PLASTER RING50 UNITS22
3-80TO USE WITH PLASTER RING50 UNITS22
7-23DJUNCTION BOX SUPPORT50 SETS26
2-40FOR RECESSED LIGHT50 SETS52
2-40SFOR RECESSED LIGHT ATLAS – PRESCOLITE50 SETS38
240-DFOR RECESSED LIGHT – 100W – 150W SQUARE ATLAS50 SETS46
F1-75TVERTICAL MOUNT T-BAR FOR RECESSED FIXTURES50 SETS45
F251TFOR HALO H7-S50 SETS26
2-40STFOR LIGHTOILER 1102 SERIES50 SETS26
1-16RMULTIPLE SWITCH BOX HOLDER50 UNITS20
1-23A26″ CEILING BAR50 UNITS35
1-23E18″ CEILING BAR50 UNITS25
2-28A26″ BAR50 UNITS34
2-28B18″ BAR100 UNITS49
2-28C12″ BAR100 UNITS35
F2-40TFOR LIGHTOILER 7054 – FOR SUSPENDED CEILING50 SETS38
7-26AFOR LIGHTOILER 7054 – 27″ FOR WOOD CEILING50 SETS37
211221″ BAR HANGER50 UNITS26

Conduit Supports

1-Hole Straps

These Rigid Conduit and Pipe IPS/ Heavy conduit straps are used to mount rigid conduit to any surface.

CAT#EMT SIZEPIPE SIZESTND PACKLBS PER MASTER CARTONMASTER CARTON QUANTITYDIM ADIM BDIM C
5511/2″1003310001.82.82.62
5523/4″1004210002.231.09.75
5531″50365002.631.32.88
5541-1/4″50685002.721.48.75
5551-1/2″50552503.661.921.00
5562″50752504.162.331.13
5572-1/2″2-1/2″251702505.103.001.25
5583″3″252102505.573.561.25
5593-1/2″3-1/2″202401006.254.061.25
5604″4″201901006.844.551.25

These Thinwall Conduit EMT conduit straps are used to mount EMT conduit to any surface.

CAT#EMT SIZEPIPE SIZESTND PACKLBS PER MASTER CARTONMASTER CARTON QUANTITYDIM ADIM BDIM C
5753/8″ AC/MC1/41001510001.12.23.57
5761/2″HEAVY DUTY1004510001.66.75.57
5771/2″1002410001.66.75.57
5783/4″1003710001.95.96.63
5791″100345002.141.10.72
5801-1/4″50575003.201.40.88
5811-1/2″50502503.501.601.00
5822″50642503.832.281.13

2-Hole Straps

These 2 Hole Straps – Galvanized Steel – EMT straps are used to mount EMT conduits to multiple flat services.

CAT#EMT SIZEPIPE SIZESTND PACKLBS PER MASTER CARTONMASTER CARTON QUANTITYDIM ADIM BDIM C
6011/2″1003010002.20.75.57
6023/4″1003110002.72.95.64
6031″50255003.021.15.69
6041-1/4″50172503.681.50.76
6051-1/2″50252504.251.71.88
6062″50352504.872.161.00

These 2 Hole Straps – Galvanized Steel – Conduit (fits Rigid Conduit and Pipe) straps are used to mount rigid conduits to multiple flat services.

CAT#EMT SIZEPIPE SIZESTND PACKLBS PER MASTER CARTONMASTER CARTON QUANTITYDIM ADIM BDIM C
6261/2″1003010002.59.89.75
6273/4″1005210002.881.07.75
6281″50325003.251.32.75
6291-1/4″50242504.151.63.87
6301-1/2″50272504.751.921.00
6312″50372505.132.321.00
6322-1/2″2-1/2″25442505.862.921.00
6333″3″25602506.533.501.00
6343-1/2″3-1/2″25982507.464.001.00
6354″4″251012507.964.501.00
6365″5″1049508.505.60.75
6376″6″1057509.386.50.75

Conduit Riser 2-Hole Straps

These Conduit Riser Two Hole Straps 12GA Hot Dipped Galvanized 9/32″ Hole Size are two hole conduit straps used to mount conduits to utility poles.

CAT#CONDUIT SIZESTND PACKLBS PER MASTER CARTON
CR-4004″107
CR-5005″109
CR-6006″1011

Beam Clamps

Our Reversible Top Beam Clamps are used when drop-rod length must be adjusted to accommodate the field installation finish height.

CAT#ROD SIZE AMAX LOADBCDEFBox Quantity
352-EG1/4 – 202501 5/81 1/211/41/2100
3533/8 – 164001 5/81 1/213/41/250
353-EG3/8 – 164001 5/81 1/213/41/250
3543/8 – 164001 5/81 7/81 1/161 1/41/250
354-EG3/8 – 164001 5/81 7/81 1/161 1/41/250
3601/2 – 135001 11/161 1/213/41/250
360-EG1/2 – 135001 11/161 1/213/41/250
3611/2 – 135001 5/81 7/81 1/161 1/41/250
361-EG1/2 – 135001 5/81 7/81 1/161 1/41/250

Our Malleable Iron Beam Clamps are used with conduit hangers, bridle rings, and drop rods. They are tapped for threaded rods on their bottoms & backs.

CAT#TRADE SIZEDESCRIPTIONSTND PACKLBS PER MASTER CARTONMASTER CARTON QUANTITYDIM ADIM BDIM CJAW OPENING
16531″1/4 – 20 TAPPED50532501 3/81 3/81 3/163/4
16552″3/8 – 16 TAPPED251152501 3/41 7/81 5/167/8
16562-1/2″1/2 – 13 TAPPED201802502 1/82 1/22 1/21 1/8

Our Steel Universal Beam Clamps are used with conduit hangers, bridle rings, and drop rods sized 1/4- 20, or 3/8- 16. They are tapped for rods on their bottoms and backs.

CAT#DESCRIPTIONSTND PACKLBS PER MASTER CARTONMASTER CARTON QUANTITYDIM ADIM BDIM CJAW OPENINGS
16511/4 – 20 TAPPED50625001 7/161 5/87/83/4
16523/8 TAPPED508625022 1/81 3/1615/16

Conduit Hangers

Our STEEL ZINC PLATED Conduit Hangers are conduit hangers that are used in both wet & dry locations to support runs of rigid/IMC &EMT conduits from ceilings and walls.

CAT#TRADE SIZERIGIDEMTSTND PACKLBS PER MASTER CARTONMASTER CARTON QUANTITYDIM ADIM B
5250 – B1/2″1/2″1006710001.87.75
5261 – B3/4″3/4″508510002.23.88
5272 – B1″1″50505002.54.88
5282 1/2 – B1 1/4″50312502.86.88
5293 – B1 1/4″1 1/2″50352503.23.88
5304 – B1 1/2″50472503.701.10
5315 – B2″2″25612504.111.19
5326 – B2 1/2″2 1/2″25732504.641.25
5337 – B3″3″25852505.051.25
5348 – B3 1/2″3 1/2″20732005.901.25
5359 – B4″4″20802006.001.25

Our STAINLESS STEEL Conduit Hangers are conduit hangers that are used in both wet & dry locations to support runs of rigid/IMC &EMT conduits from ceilings and walls.

CAT#TRADE SIZERIGIDEMTSTND PACKLBS PER MASTER CARTONMASTER CARTON QUANTITYDIM ADIM B
7250 – B1/2″1/2″1006710001.87.75
7261 – B3/4″3/4″508510002.23.88
7272 – B1″1″50505002.54.88
7282 1/2 – B1 1/4″50312502.86.88
7293 – B1 1/4″1 1/2″50352503.23.88
7304 – B1 1/2″50472503.701.10
7315 – B2″2″25612504.111.19
7326 – B2 1/2″2 1/2″25732504.641.25
7337 – B3″3″25852505.051.25
7348 – B3 1/2″3 1/2″20732005.901.25
7359 – B4″4″20802006.001.25

Malleable Iron Clamp Back Straps

Our Rigid IMC Conduit – One Hole Strap (Malleable Iron) conduit straps are used in both wet & dry locations to mount rigid or IMC conduits.

CAT#SIZESTND PACKLBS PER MASTER CARTONMASTER QUANTITYDIM ADIM BDIM C
4511/2″1000405002.251.00.63
4523/4″100505002.501.25.69
4531″50402502.581.42.82
4541-1/4″50502503.161.81.86
4551-1/2″25602503.762.071.02
4562″20601004.702.521.18
4572-1/2″20851005.253.051.39
4583″20801006.753.881.48
4593-1/2″10180507.454.561.72
4604″10200507.964.921.92

Our Rigid Clamp Back (Malleable Iron) clamp back spacers are used in wet and dry locations in conjunction with malleable rigid conduit straps to create space between the conduit and the mounting surface.

CAT#SIZESTND PACKLBS PER MASTER CARTONMASTER QUANTITYDIM ADIM BDIM C
4611/2″100325002.381.05.46
4623/4″100445002.501.13.53
4631″50352502.981.25.51
4641-1/4″50452503.531.35.67
4651-1/2″25542503.921.61.55
4662″20441005.152.06.81
4672-1/2″20701005.732.42.80
4683″20901006.402.90.80
4693-1/2″10140507.162.901.10
4704″10180508.903.051.10

Conduit Fittings

Conduit Bushings

These Rigid Plastic Bushings are threaded insulating bushings used on threaded rigid or IMC conduits to prevent wires from being damaged as they pass through the end of the conduits.

CAT#SIZESTND PACKWEIGHT PER STND PACKDIM ADIM BDIM C
5011/2″1001 LB1.045.365.595
5023/4″1001 LB1.281.365.780
5031″1001 LB1.640.4921.020
5041 1/4″501 LB2.000.4851.304
5051 1/2″501 LB2.260.4881.513
5062″502 LBS2.626.5501.948
5072 1/2″252 LBS3.226.6782.280
5083″252 LBS3.930.6802.865
5093 1/2″203 LBS4.425.6753.323
5104″203 LBS4.925.6873.788
5115″103 LBS6.295.9764.920
5126″103 LBS7.461.9905.900

These EMT Plastic Bushings are used to protect low voltage cables from damage caused by sharp edges on the ends of EMT conduits. They may be used with many low-voltage cables including coaxial, computer, telephone, category 5e, audio, video, etc.

CAT #SIZESTND PACKWEIGHT PER STND PACKDIM ADIM B
5131/2″1001 LB.520.840
5143/4″1001 LB.5311.056
5151″1001 LB.6251.278
5161 1/4″501 LB.6141.640
5171 1/2″501 LB.6301.915
5182″502 LBS.6272.327
5192 1/2″252 LBS1.2303.065
5203″252 LBS1.2303.695
5213 1/2″252 LBS1.2304.311
5224″252 LBS1.2304.812

These Grounding Bushings are threaded grounding bushings used to provide a means of grounding rigid or IMC conduits.

CAT#TRADE SIZEGROUNDING LUG CAPACITYDIM ADIM BDIM CUNIT PACKSTND PACKWEIGHT (lbs) PER 100 PCS
9121/2″#14 – #41.341.190.6110010007
9133/4″#14 – #41.471.450.645050011
9141″#14 – #41.631.760.722525015
9151 1/4″#14 – #41.802.100.742525018
9161 1/2″#14 – #42.112.330.802525023
9172″#14 – #2/02.552.790.852525032
9182 1/2″#14 – #2/02.843.331.101057
9193″#14 – #2/03.113.871.101073
9203 1/2″#14 – #2/03.384.421.101088
9214″#14 – #2/03.524.891.1010118
9225″#6 – #250MCM4.806.001.1310165
9236″#6 – #250MCM5.467.311.1310203

Malleable Iron Connector/ Coupling

These Malleable Iron Rigid Compression Connectors (For Threadless Rigid Conduit and IMC) are used to connect threadless rigid conduit and IMC conduit to boxes and enclosures. Concrete tight male hub threads. Zinc plated.

CAT#TRADE SIZEDIM ADIM BDIM CUNIT PACKSTND PACKWEIGHT (LBS PER 100 PCS)
8631/2″1.5000.5001.5002525020
8643/4″1.5000.5001.6252525022
8651″1.6880.5632.0001010034
8661-1/4″2.0000.6882.37555052
8671-1/2″2.0630.6882.62522065
8682″2.2500.8753.313525107
8692-1/2″2.9361.2503.750110243
8703″3.1251.3754.25015295
8713-1/2″3.1251.3754.75015383
8724″3.3751.5005.31315467
8735″4.2501.8186.0161760
8746″4.5632.0007.62511100

These Malleable Iron Rigid Compression Coupling (For Threadless Rigid Conduit and IMC) couple sections of rigid conduit together. Concrete tight. Zinc plated.

CAT#TRADE SIZEDIM ADIM BDIM CUNIT PACKSTND PACKWEIGHT (LBS PER 100 PCS)
8751/2″1.8130.5001.5002525030
8763/4″1.8750.5001.6252510032
8771″2.1880.5632.000105044
8781-1/4″2.6250.6882.37555078
8791-1/2″2.6880.7502.62522093
8802″3.0630/9383.313525159
8812-1/2″4.5002.0003.750110277
8823″4.9382.2504.25015393
8833-1/2″5.0002.2504.75015547
8844″5.6252.4385.31315626
8855″6.2502.7136.01611220
8866″6.8752.9757.62511300

Malleable Iron Set Screw Connector/ Coupling

These Malleable Iron Rigid Set-Screw Connectors (For Threadless Rigid Conduit and IMC) are used to connect threadless rigid conduit to boxes and enclosures. Concrete type male hub thread (NPS). Zinc Plated.

CAT#TRADE SIZEDIM ADIM BDIM CUNIT PACKSTND PACKWEIGHT (LBS PER 100 PCS)
8871/2″1.3750.4381.3132525013
8883/4″1.6880.5001.5632510021
8891″1.9380.5631.87552538
8901-1/4″2.1880.6252.18852544
8911-1/2″2.3130.6252.50052067
8922″2.4380.6252.938210105
8932-1/2″3.1880.7503.625210190
8943″3.8130.8754.25015272
8953-1/2″4.3130.9384.68815368
8964″4.6250.9385.18815427
8975″4.7501.3756.5001695
8986″4.9381.5007.5001911

These Malleable Iron Rigid Set-Screw Coupling (For Threadless Rigid Conduit and IMC) are used to couple sections of rigid conduit together Concrete type. Zinc Plated.

CAT#TRADE SIZEDIM ADIM BDIM CUNIT PACKSTND PACKWEIGHT (LBS PER 100 PCS)
9001/2″1.7500.7501.3752010030
9013/4″2.0000.8751.5632010032
9021″2.6881.1881.87555044
9031-1/4″2.7501.2502.18852578
9041-1/2″3.1881.5002.50052093
9052″3.3751.5633.000210159
9062-1/2″4.0001.7183.125210277
9073″4.2501.9383.75015393
9083-1/2″4.5002.2504.25015547
9094″4.7502.6254.75015626
9105″6.0002.8186.50011220
9116″6.5003.0007.50011300

3pc Malleable Iron Coupling

These 3pc Malleable Iron Rigid Couplings are used to connect threaded rigid or IMC conduits that are not able to be turned. These couplings provide concrete-tight connections.

CAT#SIZEWT/CASEPACKEDAB
8511/2″401001.431.36
8523/4″30100.631.58
8531″23501.811.89
8541-1/4″55252.192.38
8551-1/2″44252.312.83
8562″44102.443.29
8572-1/2″37102.524.03
8583″20102.584.62
8593-1/2″2952.655.35
8604″1853.825.87
8615″1254.387.00

Reducing Bushings

Application: Used with threaded rigid or imc conduit to reduce the size of female hubs in order to accommodate smaller size conduit or male threaded hubs.

Standard Features: Rigid construction, Easy installation.

Standard Materials: Steel, Malleable Iron, Zinc Electroplating

MANUFACTURED AS PER UL 2239 STANDARD

CAT#SIZEAB
RB01/2″ x 3/8″0.580.81
RB13/4″ x 1/2″0.751.02
RB21″ x 1/2″0.751.27
RB31″ x 3/4″0.961.27
RB41-1/4″ x 1/2″0.751.63
RB51-1/4″ x 3/4″0.961.63
RB61-1/4″ x 1″1.221.63
RB71-1/2″ x 1/2″0.751.87
RB81-1/2″ x 3/4″0.961.87
RB91-1/2″ x 1″1.221.87
RB101-1/2″ x 1-1/4″1.571.87
RB112″ x 1/2″0.752.35
RB122″ x 3/4″0.962.35
RB132″ x 1″1.222.35
RB142″ x 1-1/4″1.572.35
RB152″ x 1-1/2″1.752.35
RB162-1/2″ x 1″1.222.83
RB172-1/2″ x 1-1/4″1.582.83
RB182-1/2″ x 1-1/2″1.832.83
RB192-1/2″ x 2″2.282.83
RB203″ x 1-1/4″1.583.45
RB213″ x 1-1/2″1.833.45
RB223″ x 2″2.283.45
RB233″ x 2-1/2″2.703.45
RB243-1/2″ x 1-1/2″1.833.96
RB253-1/2″ x 2″2.283.96
RB263-1/2″ x 2-1/2″2.703.96
RB273-1/2″ x 3″3.353.96
RB284″ x 2″2.284.45
RB294″ x 2-1/2″2.704.45
RB304″ x 3″3.354.45
RB314″ x 3-1/2″4.104.45

Steel Reducing Bushings used with threaded rigid or imc conduit to reduce the size of female hubs in order to accommodate smaller size conduit or male threaded hubs.

CAT#TRADE SIZEDIM ADIM B
RB01/2″ X 3/8″0.6380.908
RB13/4″ X 1/2″0.6500.930
RB21″ X 1/2″0.7151.125
RB31″ X 3/4″0.7151.125
RB41-1/4″ X 1/2″0.8201.470
RB51-1/4″ X 3/4″0.8201.470
RB61-1/4″ X 1″0.8101.470
RB71-1/2″ X 1/2″0.8501.700
RB81-1/2″ X 3/4″0.8501.700
RB91-1/2″ X 1″0.8501.700
RB101-1/2″ X 1-1/4″0.8501.700
RB112″ X 1/2″0.9702.230
RB122″ X 3/4″0.9702.230
RB132″ X 1″0.9702.230
RB142″ X 1-1/4″0.9702.230
RB152″ X 1-1/2″0.9702.230

Malleable Reducing Bushings used with threaded rigid or imc conduit to reduce the size of female hubs in order to accommodate smaller size conduit or male threaded hubs.

CAT#TRADE SIZEDIM ADIM BDIM C
RB162-1/2″ X 1/2″1.0700.4301.340
RB172-1/2″ X 3/4″1.0700.5001.630
RB182-1/2″ X 11.0700.5801.950
RB192-1/2″ X 1-1/4″1.0700.6702.390
RB202-1/2″ X 1-1/2″1.0700.7002.680
RB212-1/2″ X 21.2000.7503.485
RB223″ X 1/2″1.1300.4301.340
RB233″ X 3/4″1.1300.5001.630
RB243″ X 1″1.7850.5004.075
RB253″ X 1-1/4″2.1000.4103.445
RB263″ X 1-1/2″2.0200.4403.460
RB273″ X 2″2.0000.4003.380
RB283″ X 2-1/2″1.3900.3754.395
RB293-1/2″ X 1/2″1.1800.4301.950
RB303-1/2″ X 3/4″1.1800.5001.950
RB323-1/2″ X 1-1/4″1.1800.6702.390
RB333-1/2″ X 1-1/2″1.1800.7003.280
RB343-1/2″ X 2″1.1800.7503.280
RB353-1/2″ X 2-1/2″1.1800.9203.860
RB363-1/2″ X 3″1.1800.9804.920
RB374″ X 1/2″1.2200.5001.950
RB384″ X 3/4″1.2200.5601.950
RB394″ X 1″1.2200.5801.950
RB404″ X 1-1/4″1.2200.6702.350
RB414″ X 1-1/2″1.2200.7002.680
RB424″ X 2″1.2200.7502.680
RB434″ X 2-1/2″1.2200.9203.200
RB444″ X 3″1.7750.9804.625
RB454″ X 3-1/2″1.4001.0305.200

Reducing Washers

Our reducing washers are used when connectors are smaller than the knockout hole they are intended to fill in a box or an enclosure.

CAT#SIZESTD. PKGPOUNDS PER MASTER CARTONMASTER CARTON QUANTITYDIM ADIM B
RW13/4″ – 1/2″200201000.871.51
RW21″ – 1/2″200201000.871.75
RW31′ – 3/4″2002010001.061.75
RW41 1/4″ – 1/2″100301000.872.23
RW51 1/4″ – 3/4″1003010001.062.23
RW61 1/4″ – 1″1002010001.362.23
RW71 1/2″ – 1/2″5020500.872.62
RW81 1/2″ – 3/4″50205001.062.62
RW91 1/2″ – 1″50205001.362.62
RW101 1/2″ – 1 1/4″50155001.692.62
RW112″ – 1/2″2520250.873.27
RW122″ – 3/4″25202501.063.27
RW132″ – 1″25182501.363.27
RW142″ – 1 1/4″25152501.693.27
RW152″ – 1 1/2″25152501.993.27
RW162 1/2″ – 1/2″2520250.873.27
RW172 1/2″ – 3/4″25202501.063.27
RW182 1/2″ – 1″25182501.363.27
RW192 1/2″ – 1 1/4″25152501.693.27
RW202 1/2″ – 1 1/2″25132501.993.27
RW212 1/2″ – 2″25102502.433.27
RW223″ – 1/2″25625.874.49
RW233″ – 3/4″255251.064.49
RW243″ – 1″255251.364.49
RW253″ – 1 1/4″254251.694.49
RW263″ – 1 1/2″253251.994.49
RW273″ – 2″252252.434.49
RW283″ – 2 1/2″252252.944.49
RW293 1/2″ – 1/2″10310.875.00
RW303 1/2″ – 3/4″103101.065.00
RW313 1/2″ – 1″103101.365.00
RW323 1/2″ – 1 1/4″103101.695.00
RW333 1/2″ – 1 1/2″103101.995.00
RW343 1/2″ – 2″103102.435.00
RW353 1/2″ – 2 1/2″103102.945.00
RW363 1/2″ – 3″103103.565.00
RW374″ – 1/2″10310.875.50
RW384″ – 3/4″103101.065.50
RW394″ – 1″103101.365.50
RW404″ – 1 1/4″102101.695.50
RW414″ – 1 1/2″102101.995.50
RW424″ – 2″102102.435.50
RW434″ – 2 1/2″102102.945.50
RW444″ – 3″102103.565.50
RW454″ – 3 1/2″101104.055.50

Knockout Seals

These Snap-In Style Knockout Seals are inserted in discontinued open box knockouts to protect exposed wires.

CAT#SIZESTND PKGLBS PER MSTR CARTONMASTER CARTON QTYDIM ADIM B
4101/2″1001510001.08.40
4113/4″1002010001.24.37
4121″100295001.49.35
4131 1/4″50352501.81.30
4141 1/2″50302502.21.35
4152″25402502.67.37

These Screw-Bar Type Knockout Seals are inserted in discontinued open box knockouts to protect exposed wires.

CAT#SIZESTND PKGLBS PER MSTR CARTONMASTER CARTON QTYDIM ADIM B
4162 1/2″101250
4173″101950
4183 1/2″102250
4194″102850

These 3pc. Knockout Seals with 1/16″ Neoprene Gaskets are inserted in discontinued open box knockouts to protect exposed wires.
They are used in standard, air-tight or dust-tight applications when they have a gasket.

CAT#SIZESTND PACK
310G1/2″BULK
311G3/4″BULK
312G1″BULK
313G1 1/4″BULK
314G1 1/2″BULK
315G2″BULK
316G2 1/2″BULK
317G3″BULK
318G3 1/2″BULK
319G4″BULK

Liquid Tight Connectors

Non- Metallic

Our Non-Metallic Straight Seal Tight Connectors are used in wet &dry locations when conduits and fittings are not subjected to physical damage. Used whenever flexibility is required for the installation, operation, or maintenance of electrical appliances.

CAT #SIZEUNIT/CTNSHIP CASEWT/CASEABC
NMS-383/8″2510072.00.441.09
NMS-501/2″2510062.00.441.09
NMS-753/4″1010082.03.461.30
NMS-1001″550122.25.571.50
NMS-1251 1/4″550122.00.572.40
NMS-1501 1/2″520142.25.572.68
NMS-2002″22092.50.573.31

Our Non-Metallic 90° Seal Tight Connectors are used in wet &dry locations when conduits and fittings are not subjected to physical damage. Used whenever flexibility is required for the installation, operation, or maintenance of electrical appliances.

CAT#SIZEUNIT/CTNSHIP CASEWT/CASEABC
NM90-383/8″1010092.562.141.09
NM90-501/2″1010082.562.141.09
NM90-753/4″10100112.842.381.30
NM90-1001″55082.252.811.50
NM90-1251 1/4″22083.963.362.40
NM90-1501 1/2″220104.133.452.68
NM90-2002″11094.684.043.31

Malleable Iron

These insulated Malleable Iron Seal Tight Connectors (Straight) w/insulated throats are used in both indoor and outdoor locations on flexible metallic, liquid-tight conduits.

CAT#TRADE SIZEPACKEDDIM ADIM BDIM CWEIGHT (lbs)
per 100 Pcs
MST-383/8″25/2501.1400.5001.15016
MST-501/2″25/2501.2500.5001.28018
MST-753/4″20/2001.2800.5201.55029
MST-1001″10/1001.4300.6501.80040
MST-1251 1/4″5/501.5000.6602.25056
MST-1501 1/2″4/401.6100.7302.44071
MST-2002″3/301.7600.7502.970100
MST-2502 1/2″52.1801.0104.010367
MST-3003″52.5001.1504.180461
MST-3503 1/2″52.6101.1805.250675
MST-4004″52.7401.2505.780797

These insulated Malleable Iron 90° Seal Tight Connectorsw/insulated throats are used in both indoor and outdoor locations on flexible metallic, liquid-tight conduits.

CAT#TRADE SIZEPACKEDDIM ADIM BDIM CDIM DWEIGHT (lbs)
per 100 Pcs
M90-383/8″15/1501.1400.5001.1501.48016
M90-501/2″15/1501.2500.5001.2801.51018
M90-753/4″10/1001.2800.5201.5501.54029
M90-1001″5/501.4330.6501.8001.81040
M90-1251 1/4″4/401.5000.6602.2502.16056
M90-1501 1/2″3/301.6100.7302.4402.43071
M90-2002″2/201.7600.7502.9702.820100
M90-2502 1/2″12.1801.0104.0104.410367
M90-3003″12.5001.1504.1805.500461
M90-3503 1/2″12.6101.1805.2505.930675
M90-4004″12.7401.2505.7808.340797

These insulated Malleable Iron 45° Seal Tight Connectors w/insulated throats are used in both indoor and outdoor locations on flexible metallic, liquid-tight conduits.

CAT#TRADE SIZEPACKEDDIM ADIM BDIM CDIM DWEIGHT (lbs)
per 100 Pcs
M45-383/8″15/1501.1400.5001.1501.37016
M45-501/2″15/1501.2500.5001.2801.37018
M45-753/4″10/1001.2800.5201.5501.50029
M45-1001″5/501.4330.6501.8001.81040
M45-1251 1/4″4/401.5000.6602.2501.94056
M45-1501 1/2″3/301.6100.7302.4402.40071
M45-2002″2/201.7600.7502.9702.640100
M45-2502 1/2″12.1801.0104.0107.810367
M45-3003″12.5001.1504.1809.150461
M45-3503 1/2″12.6101.1805.25011.220675
M45-4004″12.7401.2505.78012.540797

Conduit Bodies

Covers

Our A&G Conduit Body Covers – (Aluminum) are used with conduit bodies for a long-lasting raintight seal.

CAT#SIZESTND PACKLBS PER MASTER CARTONMASTER CARTON QUANTITYDIM ADIM B
671A1/2″50102501.323.95
672A3/4″50152501.564.64
673A1″20121001.805.40
674A1-1/4″ – 1-1/2″20131002.547.26
675A2″206503.189.58
676A2-1/2″ – 3″107104.3412.42
677A3-1/2″ – 4″109105.6515.16

Our A&G Conduit Body Covers – (Galvanized Steel) are used with conduit bodies for a long-lasting raintight seal.

CAT#SIZESTND PACKLBS PER MASTER CARTONMASTER CARTON QUANTITYDIM ADIM B
671S1/2″50152501.323.95
672S3/4″50202501.564.64
673S1″20181001.805.40
674S1-1/4″ – 1-1/2″20151002.547.26
675S2″206503.189.58
676S2-1/2″ – 3″107104.3412.42
677S3-1/2″ – 4″109105.6515.16

Gaskets

Our A&G Conduit Body Gaskets are used with conduit bodies for a long-lasting raintight seal. Standard materials: Neoprene Rubber.

CAT#SIZESTND PACKLBS PER MASTER CARTONMASTER CARTON QUANTITYDIM ADIM B
1101/2″100105001.303.85
1113/4″100125001.554.62
1121″50152501.755.29
1131-1/4″ – 1-1/2″50132502.727.18
1142″2562503.089.46
1152-1/2″ – 3″2525254.4012.50
1163-1/2″ – 4″2545255.7015.10

Conduit Bodies

A&G Conduit Bodies (Rigid LB Type) are used with threaded rigid conduit, IMC for providing access to interiors of conduit systems.

CAT#SIZEMAX# CONDUCTORSSHIP CASEWT/CASEABC
LB2502-1/2″3#2/0AWG1612.5005.4374.450
LB3003″3#4/0AWG1612.5005.6574.450
LB3503-1/2″3#500MCM1812.5006.9225.500
LB4004″3#500MCM1812.5006.9225.500

A&G Conduit Bodies (Rigid T Type) are used with threaded rigid conduit, IMC for providing access to interiors of conduit systems.

CAT#SIZEMAX# CONDUCTORSSHIP CASEWT/CASEABC
T2502-1/2″3#4/0AWG1713.5004.0605.825
T3003″3#250MCM1713.0004.6855.825
T3503-1/2″3#350MCM1915.9375.4507.060
T4004″4#350MCM1915.9375.4507.060

A&G Conduit Bodies (Rigid LR Type) are used with threaded rigid conduit, IMC for providing access to interiors of conduit systems.

CAT#SIZEMAX# CONDUCTORSSHIP CASEWT/CASEABC
LR2502-1/2″3#4/0AWG1613.0004.0635.709
LR3003″3#250MCM1612.7504.6825.506
LR3503-1/2″3#350MCM1815.5005.4526.171
LR4004″4#350MCM1815.5005.4526.171

A&G Conduit Bodies (Rigid LL Type) are used with threaded rigid conduit, IMC for providing access to interiors of conduit systems.

CAT#SIZEMAX# CONDUCTORSSHIP CASEWT/CASEABC
LL2502-1/2″3#4/0AWG1613.0004.0635.709
LL3003″3#250MCM1612.7504.6825.506
LL3503-1/2″3#350MCM1815.5005.4526.171
LL4004″4#350MCM1815.5005.4526.171

A&G Conduit Bodies (Rigid C Type) are used with threaded rigid conduit, IMC for providing access to interiors of conduit systems.

CAT#SIZEMAX# CONDUCTORSSHIP CASEWT/CASEABC
C2502-1/2″3#4/0AWG1613.5004.0605.825
C3003″3#250MCM1613.0004.6855.825
C3503-1/2″3#350MCM1815.9375.4507.060
C4004″4#350MCM1815.9375.4507.060

A&G Conduit Bodies Combination Threaded – SET SCREW – (EMT & RIGID LB TYPE) are used with threaded rigid conduit, IMC & EMT for providing access to interiors of conduit systems.

CAT#SIZEMAX# OF CONDUCTORSUNIT CTNSHIP CASEWT/CASEABC
DLB501/2″1#6AWG10100284.562.061.31
DLB753/4″2#6AWG1050195.312.371.48
DLB1001″3/6AWG525186.252.631.75
DLB1251-1/4″3#2AWG210138.223.502.40
DLB1501-1/2″3#2AWG210148.223.752.40
DLB2002″3#2/0AWG251310.134.133.10

A&G Conduit Bodies Combination Threaded – SET SCREW – (EMT & RIGID LL TYPE) are used with threaded rigid conduit, IMC & EMT for providing access to interiors of conduit systems.

CAT#SIZEMAX# OF CONDUCTORSUNIT CTNSHIP CASEWT/CASEABC
DLL501/2″1#6AWG10100284.561.312.06
DLL753/4″2#6AWG1050235.311.622.23
DLL1001″3/6AWG525186.251.882.50
DLL1251-1/4″3#2AWG210148.222.503.40
DLL1501-1/2″3#2AWG210168.222.673.48
DLL2002″3#2/0251410.483.294.07

A&G Conduit Bodies Combination Threaded – SET SCREW – (EMT & RIGID LR TYPE) are used with threaded rigid conduit, IMC & EMT for providing access to interiors of conduit systems.

CAT#SIZEMAX# OF CONDUCTORSUNIT CTNSHIP CASEWT/CASEABC
DLR501/2″1#6AWG10100294.561.312.06
DLR753/4″2#6AWG1050245.311.622.23
DLR1001″3/6AWG525196.251.882.50
DLR1251-1/4″3#2AWG210148.222.503.40
DLR1501-1/2″3#2AWG210178.222.673.48
DLR2002″3#2/0AWG25410.483.294.07

A&G Conduit Bodies Combination Threaded – SET SCREW – (EMT & RIGID T TYPE) are used with threaded rigid conduit, IMC & EMT for providing access to interiors of conduit systems.

CAT#SIZEMAX# OF CONDUCTORSUNIT CTNSHIP CASEWT/CASEABC
DT501/2″1#6AWG10100325.321.312.02
DT753/4″2#6AWG1050266.001.622.22
DT1001″3/6AWG525187.061.882.56
DT1251-1/4″3#2AWG210177.252.503.50
DT1501-1/2″3#2AWG210199.252.673.50
DT2002″3#2/0AWG25511.503.294.25

A&G Conduit Bodies Combination Threaded – SET SCREW – (EMT & RIGID C TYPE) are used with threaded rigid conduit, IMC & EMT for providing access to interiors of conduit systems.

CAT#SIZEMAX# OF CONDUCTORSUNIT CTNSHIP CASEWT/CASEABC
DC501/2″1#6AWG10100245.351.311.31
DC753/4″2#6AWG1050216.001.622.22
DC1001″3/6AWG525157.061.881.75
DC1251-1/4″3#2AWG210159.252.502.40
DC1501-1/2″3#2AWG210179.252.672.40
DC2002″3#2/0AWG251311.503.293.05

A&G Aluminum Conduit Bodies (EMT SET SCREW TYPE) are used with EMT for providing access to interiors of conduit systems.

CAT#SIZEMAX# OF CONDUCTORSSHIP CASEWT/CASEABC
LBE2502-1/2″3#2/0AWG1612.5005.4374.450
LBE3003″3#4/0AWG1612.5005.6574.450
LBE3503-1/2″3#500MCM1812.5006.9225.500
LBE4004″3#500MCM1812.5006.9225.500

A&G Aluminum Conduit Bodies (EMT T TYPE) are used with EMT for providing access to interiors of conduit systems.

CAT#SIZEMAX# OF CONDUCTORSSHIP CASEWT/CASEABC
TE2502-1/2″3#4/0AWG1713.5004.0605.825
TE3003″3#250MCM1713.5004.6855.825
TE3503-1/2″3#350MCM1915.9375.4507.060
TE4004″4#350MCM1915.9375.4507.060

A&G Aluminum Conduit Bodies (EMT LR TYPE) are used with EMT for providing access to interiors of conduit systems.

CAT#SIZEMAX# OF CONDUCTORSSHIP CASEWT/CASEABC
LRE2502-1/2″3#4/0AWG1612.5005.4374.450
LRE3003″3#250MCM1612.5005.6574.450
LRE3503-1/2″3#350MCM1815.5006.9225.500
LRE4004″4#350MCM1815.5006.9225.500

A&G Aluminum Conduit Bodies (EMT LL TYPE) are used with EMT for providing access to interiors of conduit systems.

CAT#SIZEMAX# OF CONDUCTORSSHIP CASEWT/CASEABC
LLE2502-1/2″3#2/0AWG1612.5005.4374.450
LLE3003″3#4/0AWG1612.5005.6574.450
LLE3503-1/2″3#500MCM1815.5006.9225.500
LLE4004″3#500MCM1815.5006.9225.500

A&G Aluminum Conduit Bodies (EMT C TYPE) are used with EMT for providing access to interiors of conduit systems.

CAT#SIZEMAX# OF CONDUCTORSSHIP CASEWT/CASEABC
CE2502-1/2″3#2/0AWG1613.004.0635.709
CE3003″3#4/0AWG1712.504.6825.506
CE3503-1/2″3#500MCM1815.505.4526.171
CE4004″3#500MCM1815.505.4526.171

Box Covers

4" Plaster Rings

4 sq. Raised Ring Covers (ONE DEVICE) are raised device covers are used to mount switches or receptacles on junction boxes for finished wall-surface depths. Tapped 6-32 device mounting tabs accept switches devices & recepticles.

CAT #DESCRIPTIONSTND PACKSTND WEIGHT PACKMASTER CARTON
700FLAT507 LBS500
7011/4″509 LBS500
7021/2″5010 LBS500
7035/8″5012 LBS500
7043/4″5013 LBS500
7051″258 LBS250
7061 1/4″2511 LBS250
7071 1/2″2510 LBS250
7082″2510 LBS250

4 sq. Raised Ring Covers (TWO DEVICE) are raised device covers are used to mount switches or receptacles on junction boxes for finished wall-surface depths. Tapped 6-32 device mounting tabs accept switches devices & recepticles.

CAT #DESCRIPTIONSTND PACKSTND WEIGHT PACKMASTER CARTON
710FLAT504 LBS500
7111/4″506 LBS500
7121/2″508 LBS500
7135/8″5010 LBS500
7143/4″5011 LBS500
7151″257 LBS250
7161 1/4″259 LBS250
7171 1/2″2510 LBS250
7182″2511 LBS250

4 11/16" Plaster Rings

4-11/16″ sq. Raised Rings (ONE DEVICE) are raised device covers are used to mount switches or receptacles on junction boxes for finished wall-surface depths. Tapped 6-32 device mounting tabs accept switches devices & recepticles.

CAT#DESCRIPTIONSTND. PACKWEIGHT PER STND PACK
800FLAT5015
8011/4″5016
8021/2″5017
8035/8″5018
8043/4″5021
8051″2523
8061-1/4″2525
8071 1/2″2527
8082″2530

4-11/16″ sq. Raised Rings (TWO DEVICE) are raised device covers are used to mount switches or receptacles on junction boxes for finished wall-surface depths. Tapped 6-32 device mounting tabs accept switches devices & recepticles.

CAT#DESCRIPTIONSTND. PACKWEIGHT PER STND PACK
810FLAT5015
8111/4″5016
8121/2″5017
8135/8″5018
8143/4″5021
8151″2523
8161-1/4″2525
8171 1/2″2527
8182″2530

4" Industrial Covers

Our 4″ Square Box Covers 4″ square industrial covers are used to mount electrical devices on 4″ square boxes in industrial settings, or when boxes are surface mounted or positioned in exposed work areas.

CAT#DESCRIPTIONSTND PACKLBS PER MASTER CARTONMASTER CARTON QUANTITY
6424″ SQ COVER1002401000
643FOR 4″ ROUND OR OCTAGON BOX COVER1001701000
643KO4″ SQ COVER WITH 1/2″ KO50120500
643KOFOR 4″ ROUND OR OCTAGON BOX COVER WITH 1/2″ KO50135500
6444″ SQ. 1 TOGGLE BOX SW. CVR.5040100
6454″ SQ. 2 TOGGLE BOX SW. CVR.5040100
6464″ SQ. TOGGLE 1 DUPLEX5031100
6474″ SQ. 1 DUPLEX RECEPT5036100
6484″ SQ. 2 DUPLEX RECEPT5036100
6494″ SQ. 30-50 AMP RECEPT5037100
6504″ SQ 1 GFCI5035100
6514″ SQ 2GFCI COVER5030100
6524″ SQ. 1 SINGLE RECEPT 1-13/32″ DIAMETER COVER5040100
6534″ SQ. 2 SINGLE RECEPT 1-13/32″ DIAMETER COVER5039100
6544″ SQ. 20 AMP RECEPT 1-19/32″ DIAMETER COVER5036100
6554″ SQ. 30 AMP TWIST LOCK 1-23/32″ DIAMETER COVER5037100
6564″ SQ. 1 TOGGLE 1 GFI/ DECO SW5031100
6571 DUPLEX RECEPTICLE 1 GFI/ DECO5031100
6581 TOGGLE 1 SINGLE RECEP 1-13/32″ DIAMETER5032100
6591 DUPLEX RECEPT 1 SINGLE RECEPT 1-13/32″ DIAMETER5033100
66030-60 AMP REC 2-7/16″ DIAMETER5032100

4 11/16" Industrial Covers

Our 4-11/16″ Industrial Covers(1/2 Raised) with included screws and nuts are used to mount electrical devices on 4-11/16″ square boxes in industrial settings. they are also used when boxes are surface mounted or positioned in exposed work applications.

CAT#DESCRIPTIONSTND BOXSTND PACK WEIGHT
641FLAT BLANK10039 LBS
641KOBLANK W/ 1/2 KO5017 LBS
72C32SINGLE RECEPT 1-13/32″2512 LBS
72C351 TOGGLE SWITCH2513 LBS
72C362 TOGGLE SWITCH2513 LBS
72C381 DUPLEX RECPT2513 LBS
72C392 DUPLEX RECPT2512 LBS
72C411 TOGGLE 1 DUPLEX2512 LBS
72C4220 AMP RECEPT 2-9/64″2512 LBS
72C4430-50 AMP RECEPT 2-9/64″2512 LBS
72C471 GFCI RECEPT2511 LBS
72C481 GFCI/ DECO 1 TOGGLE2511 LBS
72C492 GFCI2511 LBS
72C5030-60 AMP RECEPT 2-7/16″2510 LBS
72C511 DUPLEX 1 GFCI2510 LBS

Handy Box Covers

These Handy Box Covers are used to close handy utility boxes and provide toggle, duplex, GFCI and other outlets.

CAT#EMT SIZESTND. PKGSTND PKG WEIGHTMASTER CARTON QUANTITY
680BLANK252 LBS250
6811/2 KO252 LBS250
682DUPLEX RECEP252 LBS250
683TOGGLE SWITCH252 LBS250
6841 GFI/ DECORA252 LBS250
685SINGLE RECEP. 1.4 DIA252 LBS250
686POWER OUTLET 1.6 DIA252 LBS250

5" Round Blank Up Canopies

These 5″ Round White Blank Up Canopies are used to cover electrical wires in ceilings or walls.

CAT#DESCRIPTIONSTANDARD CARTONPOUNDS PER MASTER CARTON
6675″ Round Cover .25″ deep with 8/32 screws included. Screw holes 2-3/4″cc
to fit Sq. to Round plaster rings or 3-1/4 round boxes. Painted gloss white.
5024
6685″ Round Cover .25″ deep with 8/32 screws. Screw holes 3-1/2″cc
to fit 4″ Round/Octagon boxes. Painted gloss white.
5024

Emerg. On/Off Covers

These Emergency On/ Off Covers are used where emergency shut-off switches are needed on a box circuit. They are used on furnace burner controls and other gas and oil powered applications.

PART #STD BOX QTYDESCRIPTION
644-G
644-O
50
50
4″ SQ. BOX COVER – 1 TOGGLE – GAS
4″ SQ. BOX COVER – 1 TOGGLE – OIL
645-G
645-O
50
50
4″ SQ. BOX COVER – 2 TOGGLE – GAS
4″ SQ. BOX COVER – 2 TOGGLE – OIL
683-G
683-O
50
50
HANDY BOX COVER – GAS
HANDY BOX COVER – OIL
683-GWP
683-OWP
50
50
WALL PLATE – 1 TOGGLE – GAS
WALL PLATE- 1 TOGGLE – OIL
645-GWP
645-OWP
50
50
WALL PLATE – 2 TOGGLE – GAS
WALL PLATE- 2 TOGGLE – OIL
643-G
643-O
50
50
4″ ROUND COVER – 1 TOGGLE – GAS
4″ ROUND COVER – 1 TOGGLE – OIL

4" Square to Round Plaster Rings

These Emergency On/ Off Covers are used where emergency shut-off switches are needed on a box circuit. They are used on furnace burner controls and other gas and oil powered applications.

CAT #SIZEPACK
702-SR1/2″50
703-SR5/8″50
704-SR3/4″50
705-SR1″50
706-SR1 1/4″50

4" Round Plaster Rings

These 4″ Round Plaster Rings are raised device covers are used with 4″ octagon boxes for mounting lighting fixtures, security cameras, motion detectors, and other devices on walls or ceilings.

CAT#SIZEPACK
703-R5/8″50

Swivel Fixtures

These 4 Sq. Round Swivel Fixture Hangers are used to secure lighting fixtures, security cameras, motion detectors, etc. Ball type swivel fixture covers mount pendant or flourescent lighting fixtures to boxes. Furnished with 3/4 X 1/2″ Steel reducing bushing.

CAT#DESCRIPTIONSTND CARTONLBS PER MASTER CARTONDIM ADIM B
663For 3-3/4″ and 4″ Octagon Boxes Pivot Threaded for 1/2″ Pipe or 3/4″ Pipe25504-1/162-1/16

These 4 Sq. Square Swivel Fixture Hangers are used to secure lighting fixtures, security cameras, motion detectors, etc. Ball type swivel fixture covers mount pendant or flourescent lighting fixtures to boxes. Furnished with 3/4 X 1/2″ Steel reducing bushings.

CAT#DESCRIPTIONSTND CARTONLBS PER MASTER CARTONDIM ADIM B
665For 4″ Square Boxes with Pivot Threaded for 1/2″ Pipe, 3/4″ Pipe25504-3/162-1/16

Supports & Bar Hangers

Box Mounting Brackets

A&G Box Mounting Brackets are used to support electrical boxes mounted to metal or wood studs.

CAT#DESCRIPTIONSTND BOX
BMB-23ATTACHES 4″ AND 4-11/16″ OUTLET BOXES TO METAL STUDS. REDUCES MOVEMENT OF BOX IN WALL. STUD DEPTH 2-1/2″ AND 3-1/2″100 PCS

A&G Box Mounting Brackets are multi-box mounting brackets that are used to secure electrical boxes in
standard 16″ stud walls.

CAT#DESCRIPTIONSTND BOX
BMB-16MOUNT UP TO THREE 4″ AND 4-11/16″ BOXES/PLASTER RINGS 16″ STUD SPACING100 PCS

Bar Hangers

These adjustable-length Screw Gun Brackets are bar hangers that allow electrical boxes to be quickly and easily installed between ceiling joints or wall studs.

CAT#DESCRIPTIONSTND BOX
SGB-16MOUNT 1-1/2″ OR 2-1/8″ Deep Boxes. Adjustable 11″ to 18″ Stud Spacing50 PCS

These adjustable-length Screw Gun Brackets are bar hangers that allow electrical boxes to be quickly and easily installed between ceiling joints or wall studs.

CAT#DESCRIPTIONSTND BOX
SGB-24MOUNT 1-1/2″ OR 2-1/8″ AND 2-1/2″ Deep Boxes. Adjustable 17″ to 26″ Stud Spacing50 PCS

Box Supports

Our Box Supports support the attachment of boxes in drywall & paneling, etc. where there are no means of attaching boxes.

CAT#DESCRIPTIONSTND PACKLBS PER MASTER CARTONMASTER CARTON QUANTITYDIM ADIM BDIM C
2-29ADRY WALL OUTLET100 SETS325005 1/4″2 1/8″1 1/2″
2-29BDRY WALL OUTLET50 SETS325005 1/4″2 1/8″1 1/2″

Cable Supports

Our A&G Cable Supports contain easy to use locking tabs, and have flared edges for cable protection. NEC 300.4D applicable. For wood or metal stud.

CAT#DESCRIPTIONSTND BOX
CS6CABLE SUPPORT – NON-METALLIC CABLE OR METAL CLAD CABLE TO WOOD OR METAL STUDS100 PCS

Flexible Conduit and Cable Hanger, 1 ¾” DIA HOOK BUNDLE 6 RUNS OF MC OR AC.*Refer to local authorities and NEC article 310 for derating ampacity when flexible power cables are used.*

CAT#DESCRIPTIONSTND BOX
WH6SUPPORT 6 RUNS OF MC/AC CABLE, 1 ¾” DIA HOOK.100 PCS
ULTIMATE LOAD LIMIT 75 LBS

Low-Volt Mounting Plates

These Single-Gang Brackets are mounted to dry-wall to attach low-volt devices and plates in existing walls from 1/2″ to 1- 1/4″ thick walls.

CAT#DESCRIPTIONSTND BOX
MPB-1SINGLE GANG MOUNTING PLATE BRACKET WITH SCREWS100 PCS

A&G 2 Gang Low-Volt Brackets are mounted to dry-wall to attach low-volt devices and plates in existing walls from 1/2″ to 1- 1/4″ thick walls.

CAT#DESCRIPTIONSTND BOX
MPB-2TWO GANG MOUNTING PLATE BRACKET WITH SCREWS100 PCS

Pulling Ropes

3 Strand Poly Rope

A&G 3 Strand Twisted Polypropylene Rope is a strong lightweight general purpose monofilament rope with many uses. It is waterproof, rot, and mildrew resistant.

CAT#SIZESTND BREAKING STRENGTH (LBS)WEIGHT EACH
316603/16″ X 600′ REEL7154 LBS
316123/16″ X 1200′ REEL7158 LBS
316363/16″ X 3600′ REEL71524 LBS
142501/4″ X 250′ REEL12383 LBS
146001/4″ X 600′ REEL12388 LBS
141201/4″ X 1200′ REEL123815 LBS
516605/16″ X 600′ REEL188111 LBS
516125/16″ X 1200′ REEL188122 LBS
382503/8″ X 250′ REEL26737 LBS
386003/8″ X 600′ REEL267317 LBS
381203/8″ X 1200′ REEL267334 LBS
122501/2″ X 250′ REEL415812 LBS
126001/2″ X 600′ REEL415829 LBS
121201/2″ X 1200′ REEL415857 LBS
586005/8″ X 600′ REEL613845 LBS
346003/4 X 600′ REEL841565 LBS
265006500′ BUCKET PULL-LINE21010 LBS
922002200′ #9 TWINE NYLON TUBE851 LB
522002200′ BUCKET PULL-LINE50010 LBS

Measure/ Pull Tape

Our Polyester Measure/ Pulling Tapes are blown into conduits to accurately measure and pull wires and cables.

CAT#DESCRIPTIONWETGHT EACH
121251/2″ X 3000′ REEL 1250 LBS OF BREAKING STRENGTH (see Spec Sheet)26 LBS
581805/8″ X 3000′ REEL 1800 LBS OF BREAKING STRENGTH (see Spec Sheet)35 LBS
345003/4″ X 500′ REEL 2500 LBS OF BREAKING STRENGTH (see Spec Sheet)8 LBS
341503/4″ X 1500′ REEL 2500 LBS OF BREAKING STRENGTH (see Spec Sheet)24 LBS
342503/4″ X 3000′ REEL 2500 LBS OF BREAKING STRENGTH (see Spec Sheet)46 LBS
31630CONDUIT MEASURING TAPE, 3000′ REEL 160 LBS OF BREAKING STRENGTH4 LBS

Misc Items

Jack Chains

Our Jack Chains are used for hanging and securing lighting fixtures for work loads ranging from 29 to 43 lbs.

CATALOG NUMBERDESCRIPTION
105#12 PRE GALV CHAIN – 100′ SPOOLS / WORK LOAD 29 LBS
105S#12 STAINLESS STEEL – 100′ BOX / WORK LOAD 29 LBS
106#12 PRE GALV CHAIN – 1000′ BUCKET / WORK LOAD 29 LBS
107#10 PRE GALV CHAIN – 100′ BOXES / WORK LOAD 43 LBS
108#10 PRE GALV CHAIN – 500 BUCKET / WORK LOAD 43 LBS

S-Hooks

These S. Hooks are used to join chains or to attach accessories whenever needed. Easy to use. A must have!

CAT#SIZEDESCRIPTIONSTND PACKSTND PACK WEIGHT
SHJC121-1/4″ X .105S.HOOK1001 LB
SHJC101-1/2″ X .135S.HOOK1002 LB

Fixture Chains

Our Flourescent Fixture Chains are used for hanging fixtures and work loads up to 50lbs.

CATALOG NUMBERDESCRIPTIONSTANDARD PACKSTANDARD WEIGHT
FC3001 YD. LENGTHS WORK LOAD 50 LBS.10035 LBS

Duct Seal

Our A&G Duct Seal is used to seal around junction boxes, flashing, and service mast entries, etc. Can be
painted.

CAT#DESCRIPTIONSTND PACKLBS PER MASTER CARTONMASTER CARTON QUANTITY
DS11 POUND505050
DS55 POUNDS105010

Nail Plates

Our Nail Plates are cable protection plates that are used when protection is needed with non-metallic cables or low voltage wires passing through wood.

CAT#DESCRIPTIONSTND PACKLBS PER MASTER CARTONMASTER CARTON QUANTITYDIM ADIM B
1661NAIL PLATES100435001 1/2″2 3/4″
1662NAIL PLATES100705001 5/8″5″

2-Hole Service Entrance Straps

These Two Hole Straps for Service Entrance Cables are used to support and secure service entrance cables to building structures.

CAT#SERVICE ENTRANCE CABLE SIZESTND PACKLBS PER MASTER CARTONMASTER CARTON QTYDIM ADIM BDIM C
591A6/3 RANGE1002110002.40.50.75
592B3/31003510002.75.60.75
593C3 – 1/050215003.14.81.75
594D3 – 4/050225003.50.93.75

Electrical Tape

Our PVC Electrical Tapes are durable electrical tapes used to insulate exposed wires in order to prevent short circuits and shock hazards. Also used for color marking.

CAT#SIZEDESCRIPTIONSTND BOXSTND PACK WEIGHT
2243/4″ X 60′7 MIL BLACK PVC TAPE250 ROLLS44 LBS
2253/4″ X 60′7 MIL RED PVC TAPE100 ROLLS44 LBS
2263/4″ X 60′7 MIL WHITE PVC TAPE100 ROLLS44 LBS
2273/4″ X 60′7 MIL BLUE PVC TAPE100 ROLLS44 LBS
2283/4″ X 60′7 MIL GREEN PVC TAPE100 ROLLS44 LBS
2293/4″ X 60′7 MIL ORANGE PVC TAPE100 ROLLS44 LBS
2303/4″ X 60′7 MIL YELLOW PVC TAPE100 ROLLS44 LBS
2313/4″ X 60′7 MIL BROWN PVC TAPE100 ROLLS44 LBS
2323/4″ X 60′7 MIL GRAY PVC TAPE100 ROLLS44 LBS
2332″ X 60ydsDUCT TAPE ECONOMY GRADE24 ROLLS30 LBS

Lampholders

Our Rubber Pig Tail Sockets for use in electrical equipment harnesses, light strings and related applications wire leads are 5″ color coded stranded wire,stripped for easy connection.

CAT#DESCRIPTIONLBS PER MASTER CARTONSTANDARD CARTON
120RUBBER PIGTAIL1050

Our Lampholders with Pullchains are porcelain or plastic lampholders are mounted on octagon boxes or raised rings wherever lighting is needed.

CAT#DESCRIPTIONLBS PER MASTER CARTONSTANDARD CARTON
122PORCELIAN PULLCHAIN3750
124PLASTIC PULLCHAIN25100

Our Lampholders without Pullchains are porcelain or plastic lampholders are mounted on octagon boxes or raised rings wherever lighting is needed.

CAT#DESCRIPTIONLBS PER MASTER CARTONSTANDARD CARTON
121PORCELIAN KEYLESS3050
123PLASTIC KEYLESS20100

Shake N Seal Splice Kits

Our Shake N’ Seal Splice allows users to splice wires in any environment. Submiersible in water. Provides a permanent water tight seal. Protects from moisture, voltage leaks, as well as helps to eliminate deterioration. Not only are the kits safe and easy to use, they do not require a tourch or flame.

WIRE TYPEES137SES200SES200SVE200SVES1150
NO. OF CONDUCTORS (MAX)NO. OF CONDUCTORS (MAX)
18-1610201414
14-1261299
104866
836444
622223
422222
322222
212222
112222
1/02
2/02
3/02
4/02
250MCM2

Tie Wires

These ceiling-grid Tie Wires mount to ceilings and allow installer to hang ceiling grids or support multiple electrical boxes, cable support.

CATALOG NUMBERSIZESTANDARD CARTON
10416 GA Galvanized Tie Wire – 360ft20 ROLLS

These ceiling-grid Tie Wires PVC Coated mount to ceilings and allow installer to hang ceiling grids or support multiple electrical boxes, cable support.

CATALOG NUMBERSIZESTANDARD CARTON
104-PVC16 GA PVC COATED – 360′20 ROLLS
Top